Team Group P2 IDE Solid State Disk
Speed plays a decisive role in computing. When the computer runs slowly, not only will the work progress be delayed, even our thoughts will be interrupted. Therefore, hard drives with higher speed will mean efficiency to professional graphic designers.The 2.5-inch P2 IDE Solid State Disk (SSD) from Team Technologies not only enhances the computer startup and data transfer speed, but also loads programs much faster than conventional mechanical hard drives. The excellent speed performance of the P2 IDE SSD is particularly felt when users open many windows at the same time. This saves designers a lot of time from searching images and drawings and allows them to enjoy speedy reading and writing, thus fully displaying computing performance and speed.
With the excellent read/write speed, low power consumption, no noise, shockproof and lightweight features, the 2.5-inch P2 IDE SSD from Team allows users to experience the unprecedented sense of computing speed and makes it superior to conventional mechanical hard drives. As its maximum transient read speed is much faster than conventional hard drives, it enhances the efficiency of heavyweight software. When compared with 2.5-inch SATA conventional hard drive of the same size, it runs 140% faster, i.e. its data transfer performance has exceeded that of conventional hard drives. Also, Team equips the P2 IDE SSD from Team with the leveling read/write technology to prolong the life of the hard drive and extend the running time of laptops, thus enhancing overall work performance!
Specification P2 IDE SSD：
|Interface||44 Pin IDE|
|Transfer speed||2GB（MLC） : up to 70MB/s~80MB/s for Read max*
up to 40MB/s~50MB/s for Write max*
64GB、128GB（MLC）: up to 50MB/s~60MB/s for Read max* up to 30MB/s~40MB/s for Write max*
*Note: Speed may vary due to host hardware, software and usage
|Power source||DC + 5.0V ±5%|
*2.5” SSD uses the IDE interface and supports ATA-5 Ultra DMA transfer.
|Operating environment||Temp：0℃ ~ +70℃|
|Read/Write life||3,000,000 Hours|
Source: Team Group