ASUS presents Fonepad 7 tablet

ASUS presents Fonepad 7 tablet

The Taiwanese hardware maker ASUS has presented its latest tablet – the Fonepad 7 – at an event held in Taiwan. The new tablet is based on the Intel Moorfield platform and measures 194.3 x 108.9 x 9.8 mm for total weight of 299 grams. The device is also available in black or white.

The Fonepad 7 packs an Intel Atom Z3530 processor with four cores at 1.33 GHz, PowerVR G6430 graphics at 457 MHz, a 7-inch sensor IPS display at 1280 x 800 pixels, 2 GB of RAM, 8 GB or 16 GB of internal memory, a microSD card slot for expansion, one rear 5 MP camera with support for 1080p video recording, one 5 MP front camera with support for 720p video recording and more. The tablet also supports 802.11n Wi-Fi, Bluetooth 4.0, LTE and has a GPS receiver. A 3950 mAh battery powers the hardware inside.

The Fonepad 7 runs Android 5.0 Lollipop and adds the ZenUI user interface on top of the popular mobile operating system. The tablet sells for USD 250.

Source: ASUS

Related posts

Toshiba to release cheap but powerful laptop

The Japanese tech company Toshiba is getting ready to release a new laptop – the Satellite S955 – that despite its modest cost will offer some fast hardware. The Satellite S955 will be based on Intel Core i5 Ivy Bridge chips but customers can also get AMD’s A8 APU if they wish to do so...

Sony Bravia KDL-52XBR7 - Review

Among higher-end LCD TVs, a 120Hz refresh rate is fast becoming a standard feature. Typical HDTVs refresh at 60Hz, so doubling the refresh rate allows TV makers to add dejudder video processing that smooths out the picture, reduce blurring in motion, and match the frame rate of 1080p/24 sources...

Toshiba Launches New 2.5-inch 7,200 RPM HDD Series

Toshiba Corporation , the pioneer in small form factor hard disk drives (HDDs), today announced a new family of high-performance 7,200RPM 2.5-inch HDDs, including a top-end drive with a half-terabyte capacity. Mass production of the series will start in October. Toshiba's high-performance...

Leave a comment